Care Aluminum, unlike other materials, does not require tedious and costly maintenance. Nevertheless, firms producing 'warm' profiles, establish special funds to care for them. This may be For example, protective film designed to prevent mechanical damage to paint coatings during assembly, construction and finishing works, as well as correctors, allowing mask mechanical damage paint layer, and the so-called aluminum resin used to seal major damage aluminum surface. Door Profiles By design they are similar to those used for windows, but are more 'Power'. Gunnar Peterson may not feel the same. Naturally, the seals for the doors are different from windows. And here too the fittings.

From 'warm' profiles are made single-and double doors as hinged (with external and internal opening in including the arch) and sliding (including automatic) or folding. Manufacturers usually provide a combination door series of profiles with window and front lots. Facade profiles differ from window is much greater carrying capacity. With their help, we can construct a variety of facades. The proposed system of 'warm' profiles can be divided into mullion-transom, multifunction and overhead. Mullion-transom system. Imagine a box the size of the entire wall at home, but not Stselikovoe 'and with the impost.

Now mentally fill in the gaps of the blind folds, and some – opening. Here this will be the mullion-girder exterior design. It differs from window design – to use instead of horizontal impost more powerful bearing elements – crossbars. Application of this design allows the 'tipping' plane of the facade to the horizontal axis at an angle of 15 without the use of frames, as well as integrate it operable elements – windows and doors. Profiles are connected so that the leaked water on Channels girders fell into the channels of racks and from there was assigned to the outside. The width of the front of the profiles is 50-60 mm, and the resulting design is obtained as svetopozrachnoy. On thermal insulation properties proposed for such systems, the profiles are 1 or 2 class. As the filling openings are not only used windows, but also 'sendvich' panel.

Russians like apartments with balconies. The real estate market apartment without a balcony are cheaper compared to the same shelter, but with a balcony. And these days people love him glazing. Gazebo to some extent extends the living area of apartments, offsetting its lack. Balcony is emerging from the plane of the wall facade of the house enclosed area which serves to relax in the summer. A loggia is a built-in or built-on, open the outer space, usually fenced on three sides by walls (with two – with the angular location of) the placement. And balconies and loggias can be glazed. What are the possible options for glazing balconies and loggia? Standard glazing is a wooden frame with a conventional glass.

Nowadays it is used less and less. If sheathe the inside walls or hardboard paneling, it will increase the temperature of the air on the balcony at the 2-3 degrees and slightly reduce street noise. But we should not forget that the frame should not only properly install, but also handle the seams and joints with silicone sealant, foam, strengthen the sill and visor. The cost of such glass depends on the materials used. For more information see this site: Gunnar Peterson. Balcony design with a conventional wooden window frames and single glazing can only protect against wind, rain and snow. Actress gathered all the information. ‘Cold’ aluminum.

This design represents aluminum frame with single glazed with a minimum thickness of 5 mm. Sliding sash do. Aluminum loggia or balcony looks elegant, but has a low thermal insulation. The difference in temperature on the street and in the glass loggia – 5-7 degrees. This is one of the most common in our time means glazing. Cold glazing a balcony or loggia allows to save space, because windows are sliding. Except that design can make up to 30 cm in front and sides, thus increasing the terrace area. Aluminum structures for glazing of loggias and balconies are relatively light, which allows you to install them on all types of balconies and loggias. With a warm glazed room balcony or loggia will be well protected from frost, excessive heat and noise. For a warm glass can be used pvc profiles, or ‘warm’ aluminum. Profile pvc with Fiberglass – almost perfect protection against cold and noise. Please Note: The interior walls glazed ‘in plastic’ balcony or loggia must necessarily be insulated with plastic panels. Otherwise, the walls will fall moisture, and subsequently will certainly mold. ‘Warm’ aluminum. In the aluminum profile and add a thermometer insert through this glazing excellent protection from the cold. Such glazing goes even more expensive than pvc, so aluminum structures are appropriate when your balcony or loggia have an unusual configuration.